UTT Technologies Application
http://www.uttglobal.com Page 71
MS-CHAPV2:
the Microsoft version of the Challenge-Handshake Authentication Protocol.
ANY:
If selected, VPN gateway will automatically negotiate it with the remote VPN
appliance.
Encryption:
Select the way of data encryption mode. Note when you choose MS-CHAPV2 as
PPP aunthentication mode, you must select MPPE as data encryption mode.
MTU:
Specify the largest packet size permitted for network receive. During dialing, The VPN
gateway will automatically negotiate it with the remote VPN appliance when dialing. Unless
special application, please leave the default value of 1478 bytes.
4.30 Access Control
On the
Application
>
Access Control
page, you can specify the IP addresses of LAN users who
can access to the Device to do the settings.
Figure 4-47 Access Control
Enable Access Control:
Click to enable Access Control.
IP Address Range:
Specify the IP address range of LAN users who can access to the Device
to do the settings.
Notes:
If you have enabled DHCP Server, the LAN users will obtain IP address automatically
on and on, so in case of users can’t access to the Device, please configure IP/MAC Binding for
your current device before you enable Access Control.