Installation Guide
Roseberry Framed Mirror
Important Information
•
Read the instructions carefully.
•
Check the product for any signs of damage and remove any protective film.
•
It is recommended that a technically competent installer undertakes installation.
•
It is the inst
aller’s responsibility to carry out a thorough assessment of the wall type and the
weight of the product and use appropriate fixings.
•
Care should be taken when drilling walls to avoid any hidden wires or pipes.
Installation
Push the plastic inserts into the rear of the mirror panel.
Note
: the mirror can be fitted portrait or landscape.
Ensure that the inserts are aligned in the correct direction.
Once the inserts have been fitted, they cannot be removed.
Mark the wall to suit the distance between the centres
of the inserts.
Drill the wall and secure the fixings (not supplied) at the
marked positions.
Note
: you must ensure that the fixings are suitable for the
weight of the mirror and the wall type.
Hang the mirror onto the wall fixings, ensuring that they are
located securely into the inserts.
Care & Maintenance
Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more thorough
cleaning, occasionally wipe your furniture with a soft cloth dampened with a mild detergent
solution. Surfaces should be thoroughly dried with a lint free cloth to prevent watermarks. Under
no circumstances should solvent cleaning agents, bleach or abrasive cleaning agents or cloths be
used. Glass or mirrored panels should be cleaned using a non-solvent based glass cleaner and a
soft cloth. Spills should be removed immediately using a clean cloth. All bathroom furniture will
deteriorate through prolonged periods of exposure to high levels of condensation so bathrooms
must be adequately ventilated using suitable extraction. Failure to ensure adequate ventilation
may invalidate your guarantee. If it required to use the touch-up paint, ensure that the surface is
dry and clean and free from dust or oils. The paint should be applied using a slightly damp
sponge. Carefully dap the paint onto the required area and leave it to dry. Multiple coats may be
required to build-up the paint to give the required finish.
