Installation of MC450 Coring Attachment
To install the coring attachment:
CAUTION
MC450 Coring Unit. Operator’s Manual
© 2020 Utilicor Technologies Inc.
3
Until the attachment lock pins are fully in the locked position, the attachment has not
been safely secured to the machine. Do not stand near the attachment until it is fully
secured to the machine.
Position the attachment on a level surface.
NOTICE:
Clean the lower edge of the female attachment mounting plate to remove any
debris that might interfere with the attachment installation.
Start the machine engine, lower the loader arm and tilt the mounting plate forwards.
NOTICE:
Make sure that both of the attachment lock pins are in the Unlocked Position
Slowly drive towards the attachment and align the top edge of the male mounting plate
and the upper lip of the female attachment mounting plate.
NOTICE:
Make sure to position the attachments hydraulic hoses so that they are not
damaged during the installation process. Tuck the upper edge of the male mounting plate
on the mini skid steer into the upper lip of the female receiver mounting plate.
1.
2.
3.
Overview
