Mounting the Flashlight
4. Set the flashlight with installed Spacer
in the lower half of the ring mount and
place the top half onto the ring mount with
screw holes in alignment.
1. The LT-EL700 package includes a Tactical
Angled Offset Ring Mount with Spacer.
3. Install the provided Spacer by sliding
it over the flashlight main body to the
desired location.
2. To install the flashlight, loosen the
screws with included Allen Wrench and
remove the top half of the ring mount.
Separate both halves of the ring mount.
9
10
5. Tighten the screws evenly with
included Allen Wrench (max. torque value
15in-lbs) to ensure a firm grip on the
flashlight. You may use a non-permanent
locking compound to prevent screw drift.
6. Attach the assembled flashlight and
Tactical Angled Offset Ring Mount
to
any Picatinny mounting platform by
tightening the quick lock/release thumb
nut against the rail surface. The 45°
angled offset allows the flashlight to be
mounted unobtrusively, minimizing the
use of rail space.
Do not over tighten the screws
as you could cause damage to
the flashlight body.
!
1
2
3
4
5
6