© 2020 UTC RETAIL
All rights reserved.
3
11969003 Rev
Installing the 2600 POS Workstation
AC Power Cable and Power Adapter
The UTC RETAIL 2600 POS Workstation comes with an AC Power Cable and Power Adapter.
The power adapter is mounted in the base of the 2600 workstation. The AC Power Cable is
already inserted into the Power Adapter and is intended to route through the cable opening
located in the rear of the base.
WARNING:
To avoid accidental power-up during installation, connect the AC Power Cable to
line voltage after installing all the peripheral devices.
I/O Panel
The I/O port connection area is in the lower rear of the monitor and is protected by a plastic
cover. To gain access to the I/O port connection area, slide the plastic cover straight back.
Note these images are of the rear of the monitor. It has been removed from the base for
demonstration purposes only.
