Utax P-3025 MFP User Manual Download Page 47

Page: 47 / 185

FAX Operation (Basic)

3-19

Press the





key to select [Group Member].

Press [Edit] (the

Right Select

key).

Press [Menu] (the

Right Select

key).

Press the





key to select [Add Member].

Press the

key.

Press the





key to select the destination

(individual) you want to register to the group.

NOTE:

You can search for a destination by destination

name.

Press [Menu] (the

Right Select

key).

Press the





key to select [Select].

Press the

key.

To add more destinations, repeat steps 21 to 27.

Press the

key.

Use the





key to check if the group was set

correctly.

Press the

key. The group is added to the Address

Book.

Detail:

Group Member:

3/ 4

[ Edit ]

Group Member:

Sally

Morgan

[ Menu ]

Summary of Contents for P-3025 MFP


























































































































































































Search results

Summary of Contents for P-3025 MFP

Reviews:

Related manuals for P-3025 MFP

Brands by name

Popular brands

Utax P-3025 MFP, User Manual

Search results

Summary of Contents for P-3025 MFP

Reviews:

Related manuals for P-3025 MFP

Brands by name

Popular brands