Utax LP3335 Instruction Handbook Manual Download Page 6 | Manualshive

Page: 6 / 94

background image

iv

Legal Information

Notice on Software

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE
PRINTER'S EMULATION MODE. The printer is factory-set to emulate
the PCL. The emulation mode can be changed.

Notice

The information in this guide is subject to change without notification.
Additional pages may be inserted in future editions.

The user is asked to excuse any technical inaccuracies or typographical
errors in the present edition.No responsibility is assumed if accidents
occur while the user is following the instructions in this guide. No
responsibility is assumed for defects in the printer's firmware (contents of
its read-only memory).

This guide, and any copyrightable subject matter sold or provided with or
in connection with the sale of the page printer, are protected by
copyright. All rights are reserved. Copying or other reproduction of all or
part of this guide, or any copyrightable subject matter without the prior
written consent of

UTAX GmbH

is prohibited. Any copies

made of all or part of this guide, or any copyrightable subject must
contain the same copyright notice as the material from which the copying
is done.

Regarding Tradenames

PRESCRIBE is a registered trademark of Kyocera Corporation. KPDL is
trademark of Kyocera Corporation.Hewlett-Packard, PCL, and PJL are
registered trademarks of Hewlett-Packard Company. Adobe, Acrobat,
Flash, and PostScript are registered trademarks of Adobe Systems
Incorporated. Macintosh and Bonjour are registered trademarks of Apple
Computer, Inc. Microsoft and Windows are registered trademarks of
Microsoft Corporation. Microsoft Windows Server is a trademark of
Microsoft Corporation. PowerPC is a trademark of International Business
Machines Corporation. CompactFlash is a trademark of SanDisk
Corporation. ENERGY STAR is a U.S. registered mark. All other brand
and product names are registered trademarks or trademarks of their
respective companies.

This product was developed using the Workbench Real Time Operating
System and Tools from Wind River Systems.

This product contains UFST

™

and MicroType

®

from Monotype Imaging

Inc.

CAUTION

NO LIABILITY IS ASSUMED FOR ANY

DAMAGE CAUSED BY IMPROPER INSTALLATION.

«
...
4
5
6
7
8
...
»

Summary of Contents for LP3335































































































Reviews:

No comments

Related manuals for LP3335

Brand: Magicard Pages: 30

Brand: Magicard Pages: 35

MAGICARD ID Card Printer

Brand: Magicard Pages: 30

Brand: Magicard Pages: 6

Brand: Oki Pages: 98

Aficio MP C6503SP

Brand: Ricoh Pages: 264

Aficio SP4100N-KP

Brand: Ricoh Pages: 4

Brand: TierTime Pages: 28

Brand: Flashforge Pages: 36

Brand: Intermec Pages: 38

Brand: Xerox Pages: 2

Brand: Oki Pages: 20

Genmitsu 3018-MX3

Brand: SainSmart Pages: 50

Brand: Star Micronics Pages: 194

Brand: Buffalo Pages: 2

Brand: Citizen Pages: 104

Brand: Oki Pages: 94

Oce VarioPrint i Series

Brand: Canon Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands