Utax LP3335 Instruction Handbook Manual Download Page 83

Page: 83 / 94

Troubleshooting

5-15

Inside the Printer

Pull the paper cassette all the way out of the printer. Remove any
partially fed paper.

Open the top cover and front cover, and lift the developer unit
together with the toner container out of the printer.

Remove the drum unit from the printer by holding the green levers
with both hands.

If the jammed paper appears to be pinched by rollers, pull it along
the normal running direction of the paper.

IMPORTANT

Do not try to remove paper that has already been

partially fed. Proceed to step 2.

CAUTION

The fuser unit inside the printer is hot. Do not

touch it, as it may result in burn injury.

Note

The drum is sensitive to light. Never expose the drum

unit to light for more than five minutes.

Summary of Contents for LP3335































































































Search results

Summary of Contents for LP3335

Reviews:

Related manuals for LP3335

Brands by name

Popular brands

Utax LP3335, Instruction Handbook Manual

Search results

Summary of Contents for LP3335

Reviews:

Related manuals for LP3335

Brands by name

Popular brands