Utax LP3335, Instruction Handbook Manual

Page: 40 / 94

3-6 Connecting and Printing
TCP/IP (IPv6)
This section describes how to enable the TCP/IP (IPv6) protocol.
1
If
TCP/IP (IPv6)
is set to
Off
, use U or V to select
On
and press
[OK] .
2
Press Z . Each time you press U or V , the selection changes.
3
Display the item you want to set and press [OK] . A blinking question
mark (
?
) appears while you are setting
RA(Stateless)
and
DHCPv6
.
4
Press
U
or
V
to select
On
or
Off
as the setting for
RA(Stateless)
and
DHCPv6
.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
NetWare, AppleTalk, IPP, SSL Server, IPSec and
Security Level settings
1
Press [MENU] .
2
Press
U
or
V
repeatedly until
Security >
appears.
Note Check with your network administrator for the network
address settings.
>TCP/IP (IPv6)
On
>>RA(Stateless)
Off
>>DHCPv6
Off
>>RA(Stateless)
? Off
>>DHCPv6
? Off
Security >