manualshive.com logo in svg

Utax 1102NW3UT0, Operation Manual, Page: 348 / 409

Share
Download
Utax 1102NW3UT0 Operation Manual Download Page 348

10-29

Troubleshooting > Troubleshooting

Adjustment/Maintenance

ColorCalibration

This machine contains a calibration function that automatically makes adjustments to compensate for changes that 
occur over time due to variations in the ambient temperature and humidity. So that the highest quality color printing can 
be maintained, this color calibration operation is carried out automatically each time the power to the machine is turned 
on. If color tone does not improve or color drift does not improve after executing this color adjustment, perform color print 
position correction on the following:

Color Registration Procedure (page 10-29)

1

Display the screen.

[

System Menu/Counter

] key > [

▲

] [

▼

] key > [

Adjust/Maint.

] > [

OK

] key > [

▲

] [

▼

] key > 

[

ColorCalibration

] > [

OK

] key

2

Perform the Color Calibration.

Select [

Yes

] to execute Color Calibration.

"Completed." is displayed and the screen returns to the Adjust/Maint. menu.

Color Registration Procedure

This function is available to resolve color drift. If it is not resolved by normal registration or to perform more detailed 
settings, use the detailed settings.

Normal Registration

1

Display the screen.

[

System Menu/Counter

] key > [

▲

] [

▼

] key > [

Adjust/Maint.

] > [

OK

] key > [

▲

] [

▼

] key > 

[

Color Regist.

] > [

OK

] key > [

▲

] [

▼

] key > [

Normal

] > [

OK

] key

2

Print the chart.

[

▲

] [

▼

] key > [

Print Chart

] > [

OK

] key > [

Yes

]

A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), 3 chart 
types are printed on one sheet: H-L (left), V (vertical), H-R (right).

After printing, you will return to the advanced menu for color printing position correction.

NOTE

To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.

IMPORTANT

Before performing color registration, be sure to perform 

ColorCalibration on page 10-29

. If color drift remains, 

perform color registration. By performing color registration without performing Color Calibration, the color 
drift will be resolved once, however, it may cause the serious color drift later.

Summary of Contents for 1102NW3UT0


























































































































































































































































































































































































































Reviews:

No comments