Utax 1102NW3UT0 Operation Manual Download Page 276

Page: 276 / 409

8-32

Setup and Registration (System Menu) > System Menu

NW InterfaceSend

[

System Menu/Counter

] key > [

▲

] [

▼

] key > [

System/Network

] > [

] key > [

▲

] [

▼

] key > [

NW InterfaceSend

] >

[

] key

I/F Block Set.

[

System Menu/Counter

] key > [

▲

] [

▼

] key > [

System/Network

] > [

] key > [

▲

] [

▼

] key > [

I/F Block Set.

] > [

] key

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.

NOTE

This function is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.

Item

Description

NW InterfaceSend

Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.

Value

: Standard, Option NIC

Item

Description

USB Host

This locks and protects the USB port (USB host).

Value

: Unblock, Block

USB Device

This locks and protects the USB interface connector (USB Device).

Value

: Unblock, Block

USB Storage

This locks and protects the USB memory slot.

Value

: Unblock, Block

NOTE

This function is available when USB Host is set to [

Unblock

Option I/F 1

*1 [

Optional Interface

] is displayed on P-C3065 MFP.

This locks and protects the optional interface slots.

Value

: Unblock, Block

NOTE

If the machine has two optional interface slots, you can set this feature for each slot.

Option I/F 2

*2 Only on products with the fax function installed.

IMPORTANT

After changing the setting, restart the network or turn the machine OFF and then ON.

Summary of Contents for 1102NW3UT0


























































































































































































































































































































































































































Search results

Summary of Contents for 1102NW3UT0

Reviews:

Related manuals for 1102NW3UT0

Brands by name

Popular brands

Utax 1102NW3UT0, Operation Manual

Search results

Summary of Contents for 1102NW3UT0

Reviews:

Related manuals for 1102NW3UT0

Brands by name

Popular brands