Utax 1102NW3UT0 Operation Manual Download Page 333

Page: 333 / 409

10-14

Troubleshooting > Troubleshooting

Printouts are curled.

Is the paper damp?

Replace the paper with new paper.

page 3-2

Cannot print.

Is the machine plugged in?

Plug the power cord into an AC outlet.

―

Is the machine powered on?

Turn on the power switch.

page 2-10

Are the USB cable and network cable
connected?

Connect the correct USB cable and
network cable securely.

page 2-8

Is the print job paused?

Resume printing.

page 7-13

Cannot print with USB
memory.
USB memory not
recognized.

Is the USB host blocked?

Select [

Unblock

] in the USB host

settings.

page 8-32

―

Check that the USB memory is securely
plugged into the machine.

―

Printouts have vertical lines.

Is the slit glass dirty?

Clean the slit glass.

page 10-2

Dirt on the top edge or back
of the paper.

Is the interior of the machine dirty?

Clean the interior of the machine.

page 10-3

Part of the image is
periodically faint or shows
white lines.

―

Open and then close the rear cover.

page 2-3

―

Select the [

System Menu/Counter

] key

> [

Adjust/Maint.

] > [

Service Setting

] >

[

] and decrease the adjustment

value. Decrease the adjustment value 1
level at a time from the current value. If
there is no improvement after the value
is decreased by 1 level, decrease by 1
level again. If there is still no
improvement, return the setting to the
original value.

―

Select the [

System Menu/Counter

] key

> [

Adjust/Maint.

] > [

Service Setting

] >

[

Drum Refresh

] > [

Yes

]

―

Print on the back of the
sheet is visible on the front.

―

Set [

Prevent Bleed-through

] to [

page 6-18
page 8-13

Symptom

Checkpoints

Corrective Actions

Reference

Page

Summary of Contents for 1102NW3UT0


























































































































































































































































































































































































































Search results

Summary of Contents for 1102NW3UT0

Reviews:

Utax 1102NW3UT0, Operation Manual, Page: 333 / 409

Search results

Summary of Contents for 1102NW3UT0

Reviews: