![background image](http://html.mh-extra.com/html/usystems/edge-3/edge-3_o-and-m-manual_1064761006.webp)
EDGE-3
Soundproof MDC O&M
Page 6
Introduction
Safety Instructions
•
The EDGE system is to be powered from a dedicated power source (Refer to Model Identification & Rating plate for voltage
input).
•
The EDGE system is not to be powered via an extension cord.
•
The EDGE System Fans are factory installed and configured for either 100
-
130V or 200
-
240V (Refer to EDGE Rating plate and
EMS marking for the voltage set to).
•
The EMS appliance outlets are for the EDGE fan power only. DO NOT plug any other appliance into the EMS power Outlets.
•
When performing maintenance, the EDGE System should be Isolated or the appropriate instructions followed.
•
When Installing equipment within the EDGE ensure additional safety Instructions are specified.
•
Power and distribution cables should be installed and routed so that they are unlikely to be damaged in normal operation.
•
Cable ingress to the equipment should only be made via the dedicated cable entry points.