![background image](http://html.mh-extra.com/html/usystems/edge-3/edge-3_o-and-m-manual_1064761021.webp)
Page 21
Installation
Plinth Assembly Instructions
1.
Remove the M10 allen key bolt and the M6 pozi nut and bolt from each corner of the base (note head of the M6 Bolt is locat-
ed inside the cabinet).
Place the corresponding plinth corners (left hand and right hand) on each corner with the M6 bolt and nut and the M10 nut
as per removal (make sure the levelling foot is attached to the plinth corner before fitting it onto the UCoustic base).
Once each plinth corner is fitted proceed to fit the external plinth panels using the M6 x 25 bolt onto a tapped hole on the
plinth corner.
Unwind the levelling feet till the castors are floating.