USTER HVI1000, Instruction Manual

Page: 121 / 238

USTER®
HVI 1000
Instruction Manual
Uster Technologies, Inc. Chapter 6
(3/08) System Testing
-
Page 6-27
_ On the M1000 model, the second cotton sample is being
brushed while the first cotton sample is being measured. As the
second sample is being brushed, the sampler drum doors open
for the next samples. After the measurements for the first sample
are complete, the second cotton sample is moved to the lens and
jaw system for testing.
_ After the measurements are complete the comb(s) slide back
down the comb track and are positioned in front of the sampler
drum(s).
When the tests are complete the repetition box at the top of the column
will turn gray.
9.4 Color/Trash
Note:
On M700 models, place the cotton sample directly onto the
sample glass.
_
Place a cotton sample in both the front and the rear of the
color/trash tray. Be sure that the cotton sample is large enough
to block all the light from the color head lamps and that it will
cover the color head sample glass completely.
_ Remove your hands from the sample trays and from the area of
the color head.
_ Press the S
TART
button on the Mic cabinet to begin the
measurement process. The cotton sample trays are moved to
position the first cotton sample tray under the color/trash hand.
The color/trash hand applies twenty pounds of pressure to the
cotton sample while the measurements are taken.