USTER HVI SPECTRUM, Instruction Manual, Page: 91 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 6
Configurations • Page 6-15
4. The T
EMPERATURE AND
RH tab is used to set the upper and lower
limits for temperature and relative humidity. Selections to turn
these features on/off are offered in addition to an alarm on/off
selection.
Note:
The alarm for the Temperature and RH levels sounds when either
of the high or low limits is reached.
Follow the steps below to make changes to the system
configuration under the T
EMPERATURE AND
RH tab:
1. Check or uncheck the box beside the T
EMPERATURE AND
RH
A
LARM ON
/
OFF
to activate/deactivate the alarm. An unchecked
(blank) box indicates the alarm is OFF .
2. Enter the upper and lower limits for Temperature and Relative
Humidity in the appropriate fields.
3. When you are finished, select the A
PPLY
button.
4. Select the OK button to save the changes and exit the screen.
2.5 Retest Tolerance Tab
1. Access the S
YSTEM
C
ONFIGURATION
screen by selecting the S
ETUP
button from the
HVI SPECTRUM
M
AIN
M
ENU
.
2. Next, select the C
ONFIGURE
button.
3. The S
YSTEM
C
ONFIGURATION
screen will appear: