USTER HVI SPECTRUM, Instruction Manual, Page: 210 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-24
“Download ABORTED.
FG2K.BIT File was not
FOUND” The file fg2k.bit was not found in
the c:\hvi directory. This file must
be present for the Framegrabber
to be initialized.
“Frame Grabber
Download Failed” The process of downloading the
configuration file to the
Framegrabber failed.
“Framegrabber RAM test
failed”
The RAM test was not successful
after the Framegrabber has been
initialized.
“CPLD Version Not
Available. Frame
Grabber is busy”
The Framegrabber did not
respond to the request for the
CPLD version number.
“ERROR: NOT ENOUGH
MEMORY FOR SFI
CALCULATION”
There is insufficient memory in the
PC environment. The short fiber
index calculation routines cannot
allocate the memory necessary to
run.
“No lot limit has been
selected”
In Edit mode for lot limits, you
must select a lot limit name from
the drop-down combo before you
can edit.
“Lot limit name has not
been changed” A new lot limit definition is being
generated, but the title has not
been changed from the default
“New Lot Limit” name.
“The lot limit name
already exists”
You are attempting to create a
duplicate set of lot limits.
“Breaker Error at location
X”
The breaker was in the wrong
location during the start of step X
of the length/strength cycle.