User Manual
Your TrustWorthy Industrial IoT Partner
www.pusr.com
25
Fig. 24
Miscellaneous settings
Table 10
Miscellaneous settings
Parameter Item
Description
Module name
The name of the device, up to 32 characters,can’t be null
Websocket port
Websocket server listen port NO. Range 1-65535
Websocket direction
Click the drop-down menu to select websocket mapping direction: UART or Log.
Webserver port
Web server listen port NO. Range 1-65535
User name
The user name of web console and can be modified. up to 16 characters,can’t be NULL
Password
The password of web console and can be modified. up to 16 characters,can’t be NULL
UART cache
Click the option to enable serial buffer. By default, N5X0 will empty its serial buffer when a new TCP
connection is established. This means that the TCP application will not receive buffered serial data during
a TCP link breakage. To keep the serial data when there is no TCP connection and send out the buffered
serial data immediately after a TCP connection is established, you can disable this option.
Reset timeout
This function is used for the serial device server without any data transmission or reception for a long
time, and the serial server automatically restarts. If the restart time is set between 0 and 59 seconds, this
function does not take effect. Only when the time is set to be greater than or equal to 60 seconds, the
restart function of the device without data will take effect.
The configuration will save to flash memory after clicking Save button. All configurations take effect after a system reboot.
3.1.6. Management
This page can perform some system operations on the N5X0 series serial server, including restarting, restoring factory configuration,
