User Manual
Your TrustWorthy Industrial IoT Partner
www.pusr.com
18
3.
Configuration and parameter details
3.1.
Web interface(V1 version)
Every USR-N5X0 Industrial Serial Device Server is equipped with a built-in web server in the firmware. Therefore, the device can be
accessed by using a web browser for configuring by entering the device’s IP address in the URL field of your web browser. An
authentication will be required and you will have to enter the username (Default value is “admin”) and password (Default value is
“admin”) for accessing the web interface as shown in Fig. 18. This approach (web interface) for configuring your device is the most
user-friendly. It is the most recommended and the most common method used for USR-N5X0 Serial Device Server Series. Please go
to its corresponding section for a detailed explanation.
Fig. 18
Authentication Required for Accessing Web Interface
3.1.1.
Status
After entering the correct user name and password and the authentication is successful, you will enter the main page of the Web, as
shown in Fig.19. The main page can be roughly divided into three areas. The upper area displays the logo, the lower left area is the
function menu area, the middle area is the main function display area, and the lower right area is the help document area. Fig.19
illustrates the status page of the web interface.
