background image

 

 
 
 
 
 
 
 

Place the dialer on a flat level surface or mount the unit on the wall, away from 
extreme cold or heat, direct sunlight, excessive humidity and away from 
equipment that generate strong magnetic fields. Avoid placing near large metal 
objects and areas that produce smoke, dust and mechanical vibrations. 
 

 

Clean the housing with a soft cloth lightly moistened with water or mild detergent 
solution. Never use solvents such as alcohol or thinner. Do not allow liquids to 
spill into the unit. 
 
 

The 3-Volt Lithium battery (Sanyo CR2450, Renata CR2450N or equivalent) 
are pre-installed with your WPT-900 Transmitter. Under normal use 
transmitter battery should last 12-18 months. The transmitter battery is 
always supervised and the dialer will emit beeps if the voltage drops to 
indicate replacement. Transmitter battery should be replaced at least once a 
year. After replacing the battery press either the internal or the external 
reset button to re-initialize the transmitter and restore programming (either 
the small black button located on the back of the outside of the pendant or 
the silver colored button located on the inside of the pendant). 

 

 

To ensure continuous operation during power outages, hookup to a 12VDC 
backup battery pack is recommended. (PP-1) Available from USP/Emergency 
Caller Products. 
 

 

Do not use the dialer if a gas leak is suspected or during lightning. If liquid or a 
foreign object penetrates the unit, disconnect it immediately and contact your 
installer or other qualified technician. 
 
 
When calling us for help (858-413-0149), we will be better able to help you if… 
 

 

You have read this manual  

 

Your phone line tied to the WA-900 is working. 

 

You call from a phone that is not on the same line as the WA-900 

 

C a r e   a n d   P r e c a u t i o n s  

WARNING: DO NOT EXPOSE RECEIVER UNIT OR ITS COMPONENTS, 
INCLUDING THE HORN STROBE, TO RAIN OR MOISTURE. DO NOT OPEN 
HOUSING.

LOCATION

CARE

 

WPT-900 
TRANSMITTER 
BATTERY 

OPTIONAL 
BACKUP

 

CAUTION

 

PROBLEM

6

Summary of Contents for Wanderer Alert WA-900























Reviews: