STEP 4:
Once you enter a phone number, you will be brought back to the screen that says:
SELECT: 1-4
O (DONE)
Select the memory slot you would like to phone number into.
Repeat steps 1-3 for each number to be programmed in each memory location.
STEP 5: When you are done programming all desired telephone and/or pager numbers, press “0” to exit
this section.
Programming Auxiliary Information
The dialer is preset at the factory to typical telephone line (T-LINE), Tone/Pulse and PBX options. If you
choose to accept the following default prompts, simply press “2” to scroll to the next section.
If your phone
system requires dialing a digit to get an outside line or dial tone, similar to PBX, then turn PBX on and
enter digit that is necessary to get outside line.
PRESETS
T-LINE…………….TONE
PBX………………….OFF
To change the presets, follow these steps.
Important:
If the WA-900 is failing to get an outside line with the PBX feature activated, or if your phone
system requires more than one digit to get an outside line, it will be necessary to disable the PBX feature and
instead program in the digit(s) needed for an outside line along with your phone numbers (see page 11 for how
to enter phone numbers).
NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEY REPEATEDLY AND
RETURN TO THE “EMERGENCY CALLER – USP 1.0C” SCREEN, THEN SELECT THE
SECTION YOU WERE WORKING ON BY PRESSING “1” TO ENTER A SECTION, OR
PRESSING “2” TO GO ON TO THE NEXT SECTION, THEN ENTER CORRECT
INFORMATION AND IT WILL OVERWRITE THE OLD INFORMATION.
P r o g r a m m i n g
T h e W A - 9 0 0
PBX
The LCD will display:
PROGRAM: PBX
1(ON) 2(OFF)
Press “1” for ON. Press “2” for OFF.
If “1” is entered, the LCD will display:
The LCD will display:
PROGRAM: PBX
ENTER PBX NUMBER
Enter PBX number (1 digit).
T-LINE
The LCD will display:
PROGRAM: T-LINE
1(YES) 2(NO)
Press “1” to program T-LINE.
Press “2” to scroll to the next section.
The LCD will display:
PROGRAM: T-LINE
1(TONE) 2(PULSE)
Press “1” for TONE. Press “2” for PULSE.
13
