38000-L01-001_Rev_J_SugarCUBE_Manual
9
4
Initial Setup
4.1
System Components
The
SugarCUBE™
is comprised of:
Light Source
Electrical Power Cord
Light Guide Adapter (sold separately) to match optional light guide.
Liquid or Fiberoptic Light Guide (sold separately)
Carefully unpack all components, giving particular attention to the (optional)
light guide and taking care not to touch or contaminate the ends or to exceed its
bend radius. Consult the light guide manual for handling and cleaning
instructions.
4.2
Choosing a Location
Set the
SugarCUBE
™
on a flat surface in a place that allows for adequate air
ventilation on all sides. Do not position the unit so that the back or sides of the
unit are obstructed.
NOTE:
For adequate ventilation, maintain at least 4”
of clearance around all sides of the light source
in an unenclosed space.
4.3
Light Guide Connection
Insert the appropriate end of the light guide into the light guide adapter until it
is fully seated. Do not force the light guide. Use the thumbscrew(s) to lock the
light guide in place. Refer to Section 5.1 for light guide selection information.
The light guide adapter provides for the correct
position of the light guide end relative to the LED
emitting surface, therefore no adjustments are
necessary. Ensure the correct adapter is used.
