Ushio SugarCube 38000-M03-002 Operating And Owners Manual Download Page 22

Page: 22 / 28

38000-L01-001_Rev_J_SugarCUBE_Manual

Normal Operation

Unit Status

Operation

On/Stby AND

Intensity Adjustment

buttons enabled.

(Unit in Standby

Mode)

•

One Intensity Indicator LED is active.

•

Power Indicator LED pulses once per second.

•

Fans will be OFF.

On/Stby AND

Intensity Adjustment

buttons enabled.

(Unit in Standby

Mode)

•

One Intensity Indicator LED is active.

•

Power Indicator LED pulses twice per second.

•

Fans will be OFF.

LED On

•

One Intensity Indicator LED is active.

•

Power Indicator LED is continuously illuminated.

•

LED cooling fan will be ON.

•

Power supply cooling fan will be either on or off.

Overheat Condition

•

One Intensity Indicator LED is active.

•

Power Indicator LED pulses rapidly.

•

After the unit cools, the user must toggle

On/Stby button to clear the overheat lockout.

•

Alternatively, the user can toggle the Main

Power switch to clear the overheat lockout.

•

Fans will be off.

Summary of Contents for SugarCube 38000-M03-002





























Search results

Summary of Contents for SugarCube 38000-M03-002

Reviews:

Related manuals for SugarCube 38000-M03-002

Brands by name

Popular brands

Ushio SugarCube 38000-M03-002, Operating And Owners Manual

Search results

Summary of Contents for SugarCube 38000-M03-002

Reviews:

Related manuals for SugarCube 38000-M03-002

Brands by name

Popular brands