Operating Manual
www.ushio.com
19
If the
UDC3 unit comes in contact with liquid, rinse with isopropyl alcohol and then
dry with compressed air, commercial compressed gas canisters or dry damp cloth.
Note: Air dry is highly recommended to reduce contamination of the
optical components and reduce the possibility of oxidation of the
materials used in the construction of the
UDC3
unit.
CAUTION!
Do not allow the
UDC3 unit to remain in liquid cleaning solution for
prolonged period of time.
In addition, thoroughly dry the battery hatch door seal around the O-ring, with
compressed air or by thoroughly wiping any excess liquid from this area, prior to
removing the battery hatch door. This will prevent any trapped fluid from entering
the battery compartment and exposing the electronics to fluids.
CAUTION!
Ensure there is no trapped liquid between the battery hatch door
and body prior to removing the battery hatch door.
4.2
DRYING THE UDC3 UNIT
