Operating Manual
www.ushio.com
5
Fitting Style: The adapter nut allows the UDC3 to attach to the user’s borescope.
Rotate the nut clockwise to attach the
UDC3 to a borescope and counterclockwise
to remove. The standard configuration of the Ushio
UDC3 is with an adapter nut
that threads onto the standard universal light guide post’s Storz/ACMI adapter
thread or by thumb screw for Olympus style ferrule.
WARNING!
Upon power up, the
UDC3 drives the LED to high output intensity.
Avoid looking directly at the LED during initial turn ON or anytime
while unit is ON.
Light Intensity Buttons:
Momentary pressing button or holding
down the button next to this symbol
decreases the intensity of the light.
Momentary pressing button or holding
down the button next to this symbol
increases the intensity of the light.
Battery Hatch Door: The battery cover seals the battery and electronics within
the body of the
UDC3.
2.1
BODY DIAGRAM AND DESCRIPTIONS
Battery Hatch Door
Intensity Buttons
Power Button
Figure 1:
UDC3
Body Diagram; Fitting Style
UDC3 UNIT DESCRIPTION AND
SPECIFICATIONS
SECTION 2
Power Button: The
GREEN
power button controls the ON/OFF of the
UDC3.
