Operating Manual
www.ushio.com
9
Figure 4: Standard Universal Light Guide Post
Thumb Screw
ACMI Snap-Ring Groove
Wolf Adapter Thread
Storz Adapter Thread
Installing UDC3 to User’s Borescope
1. Hold the
UDC3 so the main body fits comfortably in one hand, allowing easy
manipulation of the adapter nut with the thumb and forefinger.
2. Tighten the adapter nut onto the light guide post by turning rotary collar or
thumb screw clockwise. Do not turn the
UDC3 body.
Using the UDC3
1. Turn the
UDC3 ON by pressing the
GREEN
Power ON/OFF button, refer to
figure 5.
WARNING!
Upon power up, the
UDC3 drives the LED to high output intensity.
Avoid looking directly at the LED during initial turn ON or anytime
while unit is ON.
2. Adjust light intensity as needed, refer to figure 6.
Momentary pressing button or holding down the button next to this
symbol decreases the intensity of the light.
Momentary pressing button or holding down the button next to this
symbol increases the intensity of the light.
