Page 23
SEED CONDITIONER
1. FAN 1 CONTROL MODULE:
This module controls the function of fan #1. The
HAND button will place the fan in the manual mode of operation. The OFF button will
turn the fan in the OFF mode of operation. The AUTO button will place the device in
the automatic mode of operation. The motor will not operate in this function unless all
other devices are in the AUTO mode and the TREAT MODE is selected in the Utilities
screen.
2. FAN 2 CONTROL MODULE:
This module controls the function of fan #2. The
HAND button will place the fan in the manual mode of operation. The OFF button will
turn the fan in the OFF mode of operation. The AUTO button will place the device in
the automatic mode of operation. The motor will not operate in this function unless all
other devices are in the AUTO mode and the TREAT MODE is selected in the Utilities
screen.
3. FAN 3 CONTROL MODULE:
This module controls the function of fan #3. The
HAND button will place the fan in the manual mode of operation. The OFF button will
turn the fan in the OFF mode of operation. The AUTO button will place the device in
the automatic mode of operation. The motor will not operate in this function unless all
other devices are in the AUTO mode and the TREAT MODE is selected in the Utilities
screen.
4. BELT CONTROL MODULE:
This module controls the function of the belt. The
HAND button will place the belt in the manual mode of operation. The OFF button will
turn the belt in the OFF mode of operation. The AUTO button will place the device in
the automatic mode of operation. The motor will not operate in this function unless all
other devices are in the AUTO mode and the TREAT MODE is selected in the Utilities
screen.
5. SCREEN EXIT BUTTON:
This button is used to exit back to the previous screen.
Its functionality is the same throughout the HMI display.
6. MOTOR SPEED CONTROL MODULE:
This module allows the operator to
manually set the motor speeds whether running in HAND or AUTO modes.
H-O-A Button Descriptions
