Page 16
SEED CONDITIONER
SEED CONDITIONER SET-UP
9. Connect the red cable to the PJESTOPA on the treater control panel or automated
main control panel and then to the PJESTOPB on the Seed Conditioner control
panel. This cable must run from an A connection to a B connection
(never A to A or B to B).
10. Connect this cable to an auxiliary port on the bottom of the treater control panel.
11. Connect this cable to the belt drive motor.
12. Connect the FAN #1 cable to the fan on the inlet end of the conditioner, the FAN #2
cable to the middle fan and FAN #3 to the fan on the discharge end
10
11
12
9
