background image

7

Claims of any kind resulting from misuse will not be honored.

Safety

2

Safety

This section provides an overview of all important safety aspects for optimal protection of personnel as 
well as safe and trouble-free operation. 

Failure to follow the handling instructions and heed the safety information in this manual can result in 
serious hazards.

2.1 Intended use

The unit has been designed and built solely for the intended use described here.

The color, pipe and sewer inspection camera serves strictly for visual inspection of wastewater sewer 
lines, wastewater tanks, heating and cooling channels, ventilation shafts, electrical installation shafts, 
chimneys, wells, wastewater drop pipes and in-ground wastewater lines when used with accessories 
provided by the manufacturer in areas that do not contain potentially explosive atmospheres.

Complying with all information in this manual is also considered an aspect of the intended use. 
Every use beyond or differing from the intended use constitutes misuse.

Misuse

WARNING! 

Danger resulting from misuse! 

Misuse of the color, pipe and sewer inspection camera
can result in hazardous situations.

- Never use the unit in pipe runs with non-return flaps.
- Never use the unit in areas with potentially explosive atmospheres.
-  Never operate the unit in close proximity to combustible liquids 

and/or gases.

-  Never use the unit with accessories from anyone but the manufacturer.
- Never use the unit without a PE protective conductor.
- Never expose the unit to precipitation.
-  Never operate the unit outdoors or under similar conditions without 

a 30-mA residual-current-operated device at the power source.

-  Never operate the unit in a moist environment and/or place it in 

water or other liquids.

-  Never connect the unit to a receptacle without a protective ground 

contact.

Summary of Contents for NOZZCAM





















































Reviews: