40
Operation
Moving the camera in
the pipe run.
Use the light controller to adjust the dual-power lighting to the
light conditions in the object being inspected ( section 7. 5
“Controlling the light” on p. 41).
Adjust the video and audio values of the LCD monitor to the light and
audio conditions in the object being inspected.
Slowly and cautiously guide the
NOZZ
CAM™ through the pipe
with the aid of a high-pressure device (max. operating pressure
of the high-pressure pump <= 200 bar). In this way, any possible
obstructions and damage are recognized quickly.
As soon as an obstruction is recognized on the display of the LCD
monitor, interrupt the visual inspection and remove the obstruction
from the object being inspected so that the camera’s advance can
proceed without difficulty.
1.
2.
3.
4.
WARNING!
Risk of illness from exposure to microbiologically
contaminated deposits!
During work in sewers, the unit, accessories, personal
protective equipment and/or
cleaning utensils come into contact with
microbiologically contaminated deposits
that can cause extremely severe to fatal illnesses.
- Make sure that no unauthorized individuals can
enter the work area and danger zone.
- Always wear chemical-resistant protective gloves.
- Do not eat, drink and/or smoke while working.
- Thoroughly clean the unit, the accessories and the
personal protective equipment after each use.
- Clean and/or properly dispose of cleaning utensils
that are no longer needed in an environmentally
responsible manner.
