44
Cleaning, care and maintenance
8.3
Cleaning the unit, accessories and camera head
Cleaning the unit
and accessories
Cleaning the camera head
ATTENTION!
Risk of equipment damage from improper cleaning!
Improper cleaning of the unit can result in significant
physical damage, and possibly even total failure of the unit.
- Do not use sharp cleaning utensils.
- Wipe off the unit with a cloth moistened with
dishwashing liquid and water.
- Keep moisture away from the control box and LCD monitor.
- When cleaning, always hold the unit securely by
means of the handle of the advancing reel.
- Clean the camera head separately.
- Do not use compressed air.
- Do not use a stream of water.
Personnel:
Protective equipment:
Personnel:
Protective equipment:
Technical personnel
Chemical-resistant protective gloves
Technical personnel
Chemical-resistant protective gloves
1.
Switch off the unit and disconnect it from the power source
( section 7.2 “Switching off the unit” on p. 34ff).
2.
Wipe off all components of the unit except for the camera head
with a moist cloth.
Wipe off the protective glass of the camera head with a dry,
soft and lint-free cloth to prevent scratches.
3.
Use a hand brush with plastic bristles to remove stubborn dirt.
4.
Use a rubber care product to clean all plastic parts and the
pushing cable.
