29
BUILT-IN DISPLAY
The second generation built-in display of the Quick 4 is easier to use and more
intuitive. It provides useful information, such as current speed, gear,
transmission temperature, and TCC lock status, along with any fault messages.
Using the menus, you’ll be able to access many of the same options found in
Shiftware.
BASIC OPERATION
While the home screen is shown, you can turn the function knob in either
direction to bring up the main menu. The highlighted phrase in the center of the
screen is your selection. When you’ve found the menu item you wish to access,
push the knob down to click it. Sub-menus work the same as the main menu.
Each sub-menu has an EXIT option which will return you to the previous menu
or the home screen.
HOME SCREEN
Shows real-time transmission information such as speed, current commanded
gear, transmission temperature, selected calibration table, TCC lock, PRNDL
position, and any active faults. When low range is engaged, “LO”, “L2”, or “L3”
will be shown beside speed. “KEY OFF” will show in the PRNDL location if
ignition is off and the controller is being powered by USB. “Error” will show in the
PRNDL location if there is a PRNDL sensor error. Fault messages will be shown
in the center of the display and will cycle through them if there are multiple
errors. While no errors are present, the home screen will automatically switch to
enlarged mode for easier visibility.
Summary of Contents for Quick4 4R100
