Wireless USB Print Server User Guide
Main:
From this menu, you can select the following:
●
●
●
●
●
●
InitDevice:
From this menu, you can select and perform the following:
●
Reset Device
: This will cause the Wireless USB Print Server to reboot. To
reboot the print server, click
Yes
. This should be done after making any
configuration changes or if the Wireless USB Print Server stops responding.
●
Restore to Factory Default
: To restore all of the Wireless USB Print Server
values to the factory default settings, click
Yes
. To restore the settings only for
the current screen in the management utility, click
Set to Default
on that
particular screen.
●
Attached Remote
: This is used to connect to a Wireless USB Print Server that
is located on another LAN segment. You need to enter IP address of the remote
Wireless USB Print Serve and click
Set
. If your LAN does not have a router, this
option is not applicable.
●
Connected Protocol
: This option allows you to designate which LAN protocol is
used for communication between the selected Wireless USB Print Server and
this application. You should select only one protocol.
Diagnostic:
From this menu, you can select
Print Test Page
and then select the
printer that should print the page. This will print out a test page which contains the
configuration settings of the Wireless USB Print Server.
Help:
From this menu, you can select
Help Topics
or the
About BiAdmin
for more
information on the BiAdmin Management utility.
Status Icons
file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/management.html (6 of 7)9/14/2006 4:38:13 PM
