USR4204 User Guide
Page
29
of
52
Security is enabled by entering an Administrator username and password.
'-' Return to Configure Security Menu
Navigate back to the Configure Security Menu with this command.
Do not forget the administrator name and password! Record and
store all Administrator and User information in a secure location. The
recovery method requires you to be at the physical location of the
USR4204. See
"
Clearing A Forgotten or Disabled Administrator Name
and Password
"
for details.
User Menu (Main Menu
Y
U
number or letter of user)
At the top of the User Menu are the programmable User name and the menu name. Below
that is a list of valid commands, text, and status. Invalid commands are ignored.
Only the Change Username command ('Y') appears until a Username is entered.
'A'-'D', '1'-'2' Toggle Port Permissions
Grant or deny access to the corresponding port for the selected User.
"User 15 " User Menu (current permissions in parentheses below)
CMD
'A' Toggle "Console A " (ON )
'B' Toggle "Console B " (ON )
'C' Toggle "Console C " (ON )
'D' Toggle "Console D " (ON )
'1' Toggle "Power 1 " (ON )
'2' Toggle "Power 2 " (ON )
'Y' Change Username
'Z' Change Password
'W' Deny All Permissions
'S' Grant All Permissions
'T' Toggle User Enable (ON )
'P' Toggle Admin Privil (OFF)
'X' Delete User
'-' Return to Configure Security Menu
