US Praxis PRX130, Owner'S Manual

Page: 28 / 49

US Praxis, Inc. – Copyright 2009 © All rights reserved
28
­Continued­
Ignition system:
The engine is equipped with an electronic ignition
system. Only the spark plug requires maintenance.
For recommended spark plug, see “Technical data”.
IMPORTANT INFORMATION
Fitting the wrong spark plug type can damage the
engine.
1. Remove the ignition cable shoe and clean around
the spark plug.
2. Remove the spark plug with a 3/16" (21mm)
spark plug socket wrench.
3. Check the spark plug. Replace the spark plug if
the electrodes are burned or if the insulation is
cracked or damaged. Clean the spark plug with a
steel brush if it is to be reused.
4. Measure the electrode gap with a gapping tool.
The gap should be 0.7­0.8 mm/0.028­0.031".
Adjust as necessary by bending the side
electrode.
5. Reinsert the spark plug, turning by hand to avoid
damaging the threads.
IMPORTANT INFORMATION
Inadequately tightened spark plugs can caus
overheating and damage the engine. Tightening the
spark plug too much can damage the threads in the
cylinder head.
6. After the spark plug is seated, tighten it using a spark plug wrench so that the washer is
compressed. A used spark plug should be turned 1/8­1/4 of a turn from the seated position. A
new spark plug should be turned ½ a turn from the seated position.
7. Replace the ignition cable shoe.
MAINTENANCE