US Praxis PRX130, Owner'S Manual

Page: 36 / 49

US Praxis, Inc. – Copyright 2009 © All rights reserved
36
At the end of the season, the machine should be readied for storage (or if it will not be in use for
longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave
sticky residues that can plug the carburetor and
disrupt engine function. Fuel stabilizers are an
acceptable option to guard against sticky
residue build up during storage.
If alkylate gasoline (Aspen) is used, stabilizers
are unnecessary because this fuel is stable.
However, you should avoid switching between
regular and alkylate gasoline as sensitive rubber
components can harden. Add stabilizer to the
fuel in the tank or in the storage container.
Always use the mixing ratios specified by the
manufacturer of the stabilizer. Run the engine for at least 10 minutes after add in the stabilizer so
that it reaches the carburetor. DO NOT empty the fuel tank and the carburetor if you have added
stabilizer.
NEVER store an engine with fuel in the tank indoors or in poorly ventilated spaces where
fuel vapor can come in contact with open flame, sparks or a pilot light such as in a boiler,
hot water tank, clothing drier, etc. Handle the fuel with caution. It is very flammable and
careless use can cause serious damage to person and property. Drain the fuel into an
approved container outdoors and far away from open flame. NEVER use gasoline for
cleaning. Use a de­greaser and warm water instead.
Service
When ordering spare parts, please specify the purchase year, model, type, and serial number.
Always use genuine Praxis parts.
An annual check­up at an authorized service workshop is a good way to ensure that your machine
performs its best the following season.
To ready the machine for storage, follow these steps:
1. Clean the machine carefully, particularly the chasses and working equipment. Touch up
damage to the paint to prevent rust.
2. Inspect the machine for worn or damaged parts and tighten any nuts or screws that may
have become loose.
3. Change the engine oil; dispose of properly.
4. Open the fuel valve. Empty the fuel tank (1) and the carburetor (2).
STORAGE & TECHNICAL DATA
­Continued­