UR75 User Guide
62
IP Address
Set the IP address of RIP route.
Netmask
Set the netmask of RIP route.
ACL Name
Set ACL name of RIP route.
Metric
The metric of received route or sent route from the interface.
Range: 0-16.
Policy in/out
Select from "in" and "out".
I
nterface
Select interface of the route.
ACL Name
Access control list name of the route strategy.
Filter Policy
Policy Type
Select from "access-list" and "prefix-list".
Policy Name
User-defined prefix-list name.
Policy in/out
Select from "in" and "out".
Interface
Select interface from "cellular0", "GE1" and "GE0".
Passive Interface
Passive Interface
Select interface from "cellular0" and "GE1", "GE0".
Interface
Interface
Select interface from "cellular0", "GE1" and "GE0".
Send Version
Select from "default", "v1" and "v2".
Receive Version
Select from "default", "v1" and "v2".
Split-Horizon
Select from "enable" and "disable".
Authentication Mode
Select from "text" and "md5".
Authentication String
The authentication key for package interaction in RIPV2.
Authentication
Key-chain
The authentication key-chain for package interaction in RIPV2.
Neighbor
IP Address
Set RIP neighbor's IP address manually.
Network
IP Address
The IP address of interface for RIP publishing.
Netmask
The netmask of interface for RIP publishing.
Table 4-2-7-3
Related Configuration Example
Dynamic Routing Application Example
4.2.7.3 OSPF
OSPF, short for Open Shortest Path First, is a link status based on interior gateway protocol developed by
IETF.
If a router wants to run the OSPF protocol, there should be a Router ID that can be manually configured. If
Summary of Contents for UR75 Edge
Page 1: ...UR75 User Guide 1 ...
Page 130: ...UR75 User Guide 130 Related Topic Upgrade ...
Page 142: ...UR75 User Guide 142 3 PPPoE ...
