![background image](http://html.mh-extra.com/html/ursalink/ur75-edge/ur75-edge_user-manual_1063168063.webp)
UR75 User Guide
63
no Router ID configured, the system will automatically select an IP address of interface as the Router ID.
The selection order is as follows:
- If a Loopback interface address is configured, then the last configured IP address of Loopback
interface will be used as the Router ID;
- If no Loopback interface address is configured, the system will choose the interface with the biggest IP
address as the Router ID.
Five types of packets of OSPF:
-
Hello packet
-
DD packet
(Database Description Packet)
-
LSR packet
(Link-State Request Packet)
-
LSU packet
(Link-State Update Packet)
-
LSAck packet
(Link-Sate Acknowledgment Packet)
Neighbor and Neighboring
After OSPF router starts up, it will send out Hello Packets through the OSPF interface. Upon receipt of
Hello packet, OSPF router will check the parameters defined in the packet. If it’s consistent, a neighbor
relationship will be formed. Not all matched sides in neighbor relationship can form the adjacency
relationship. It is determined by the network type. Only when both sides successfully exchange DD
packets and LSDB synchronization is achieved, the adjacency in the true sense can be formed. LSA
describes the network topology around a router, LSDB describes entire network topology.
Figure 4-2-7-4
OSPF
Item
Description
Enable
Enable or disable OSPF.
Summary of Contents for UR75 Edge
Page 1: ...UR75 User Guide 1 ...
Page 130: ...UR75 User Guide 130 Related Topic Upgrade ...
Page 142: ...UR75 User Guide 142 3 PPPoE ...