UG87-LW User Guide
57
Action
Select from "Permit" and "Deny".
Protocol
Select protocol from "ip", "icmp", "tcp", "udp", and "1-255".
Source IP
Source network address (leaving it blank means all).
Source Wildcard Mask Wildcard mask of the source network address.
Destination IP
Destination network address (0.0.0.0 means all).
Destination Wildcard
Mask
Wildcard mask of destination address.
Description
Fill in a description for the groups with the same ID.
ICMP Type
Enter the type of ICMP packet. Range: 0-255.
ICMP Code
Enter the code of ICMP packet. Range: 0-255.
Source Port Type
Select source port type, such as specified port, port range, etc.
Source Port
Set source port number. Range: 1-65535.
Start Source Port
Set start source port number. Range: 1-65535.
End Source Port
Set end source port number. Range: 1-65535.
Destination Port Type Select destination port type, such as specified port, port range, etc.
Destination Port
Set destination port number. Range: 1-65535.
Start Destination Port Set start destination port number. Range: 1-65535.
End Destination Port
Set end destination port number. Range: 1-65535.
More Details
Show information of the port.
Interface List
Interface
Select network interface for access control.
In ACL
Select a rule for incoming traffic from ACL ID.
Out ACL
Select a rule for outgoing traffic from ACL ID.
Table 4-3-2-1 ACL Parameters
Related Configuration Example
Access Control Application Example
4.3.2.2 DMZ
DMZ is a host within the internal network that has all ports exposed, except those forwarded
ports in port mapping.
Figure 4-3-2-2
Summary of Contents for UG87-LW
Page 1: ...UG87 LW User Guide 1 ...
