UG87-LW User Guide
105
Alarm Setting
Item
Description
Name
Set the same name with the channel name to identify the remote
channel.
Condition
The condition that triggers alert.
Min.
Threshold
Set the min. value to trigger the alert. When the actual value is less than
this value, the alarm will be triggered.
Max.
Threshold
Set the max. value to trigger the alert. When the actual value is more
than this value, the alarm will be triggered.
Alarm
Select the alarm method, e.g SMS.
SMS
The preset alarm content will be sent to the specified phone number.
Phone Group Select the phone group to receive the alarm SMS.
Normal
Content
When the actual value is restored to the normal value from exceeding the
threshold value, the gateway will automatically cancel the abnormal
alarm and send the preset normal content to the specified phone group.
Abnormal
Content
When the actual value exceeds the preset threshold, the gateway will
automatically trigger the alarm and send the preset abnormal content to
the specified phone group.
Continuous
Alarm
Once it is enabled, the same alarm will be continuously reported.
Otherwise, the same alarm will be reported only one time.
Table 4-5-3-3
4.6 Maintenance
This section describes system maintenance tools and management.
4.6.1 Tools
Troubleshooting tools includes ping and traceroute.
4.6.1.1 Ping
Ping tool is engineered to ping outer network.
Figure 4-6-1-1
Summary of Contents for UG87-LW
Page 1: ...UG87 LW User Guide 1 ...
