UG87-LW User Guide
40
4.2.2 Network Server
4.2.2.1 General
Figure 4-2-2-1
Item
Description
Default
General Setting
Enable
Click to enable Network Server mode.
Disabled
NetID
Enter the network identifier.
01023
Join Delay
Enter the interval time between the end-device
sends a Join_request_message to network
server and the end-device prepares to open
RX1 to receive the Join_accept_message sent
from network server.
5
RX1 Delay
Enter the interval time between the end-device
sends uplink packets and the end-device
prepares to open RX1 to receive the downlink
packet.
1
Lease Time
Enter the amount of time until a successful join
expires. The format is hours-minutes-seconds. If
the join-type is OTAA, then the end-devices need
to join the network server agagin when it
exceeds the lease time.
"744-00-00"
Loglevel
Choose the log level.
Info
Channel Plan Setting
Channel Plan
Choose LoRaWAN channel plan used for the
upstream and downlink frequencies and
Depend on the
gateway’s variant.
Summary of Contents for UG87-LW
Page 1: ...UG87 LW User Guide 1 ...
