UG87-LW User Guide
100
4.5.2 Serial Port
Serial 1 is used for RS232.
This section explains how to configure serial port parameters to achieve communication with
serial terminals, and configure work mode to achieve communication with the remote data
center, so as to achieve two-way communication between serial terminals and remote data
center.
Figure 4-5-2-1
Serial Settings
Item
Description
Default
Enable
Enable or disable serial port function.
Disable
Serial Type
RS232
--
Baud Rate
Range is 300-230400. Same with the baud rate of the connected
terminal device.
9600
Data Bits
Options are “8” and “7”. Same with the data bits of the
connected terminal device.
8
Stop Bits
Options are “1” and “2”. Same with the stop bits of the
connected terminal device.
1
Parity
Options are “None”, “Odd” and “Even”. Same with the parity of
the connected terminal device.
None
Software
Flow Control
Enable or disable software flow control.
Disable
Serial Mode
The option is "DTU Mode". The serial port can establish
communication with the remote server/client.
DTU
Mode
Table 4-5-2-1 Serial Parameters
Summary of Contents for UG87-LW
Page 1: ...UG87 LW User Guide 1 ...
