on the nameplate of the tool. To use a not
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
CORDLESS GREASE GUNS
1. Use complete safety gear (rubber gloves,
safety shoes, ear plugs, safety goggles, hard
hat etc.). Avoid electric shock by avoiding di-
rect contact with grounded components such
as pipes, couplers etc.
2. Keep your hair, clothing, and gloves away
from moving parts. Keep hands clear of the
exposed rubber portion of Hose.
3. Do not operate this gun in explosive atmo-
spheres such as in the presence of flammable
liquids, gases, or dust. It may create sparks
leading to fire causing personal injury & mate-
rial damage.
4. The water entering the electric grease gun
will increase the risk of electric shock. Do not
handle the charger, its power plug, or the
Grease Gun with wet hands or in damp loca-
tions.
5. To avoid accidental starting, always release
the Switch before connecting the grease gun
to electrical supply.
6. Remove any metal tool attached to the
grease gun before turning the power on. A
wrench or a key that is left attached to a mov-
ing part of the gun may cause personal injury.
7. Always maintain your grip & balance while
operating the gun.
8. Use only APPROVED hoses and follow whip
hose instructions and warnings.
9. If there is leakage from the pressure valve
while using the gun, it indicates that the back
pressure is more than 6,000 PSI. It is not a prod-
uct failure. It is an indication that the gun is
not to be used for this application. Please DO
NOT try to adjust the pressure valve as it has
been set as 8 500 PSI.
Please DO NOT try to remove the valve, as this
may lead to accidents.
10
2371 manual.indd 10
28/05/15 15:12
