28
DS1099-106
Schedule:
in this page it is possible to program when the alarm must be activated (All Day, User_defined).
When
【
User_defined
】
is selected, holding the left button pressed, drag the mouse to select the programming periods. Single
cells can be enabled by clicking on each of them.
By clicking on each weekday’s name, the whole day line is enabled/disabled.
Press
Save
to save the changes.
2) HUMAN
Click on
【
Alarm
】
→
【
Human
】
to access the following page:
Setting procedure
1. Human detection can be activated/deactivated.
2. Enable/Disable automatic Human Tracking.
3. Set human detection sensitivity, options: High, Middle, Low.
4. Holding the left button pressed, drag the mouse to select the human detection area. Single cells can be enabled by clicking
on them.
5. It is possible, when Human is detected, to trigger the following actions:
Send e-mail
: with picture attached
Send to FTP
: pictures are saved on the FTP server (to set an FTP server refer to section
【
Network
】
→
【
FTP
】
)
Video Rec on SD
: event video is recorded on the camera’s SD memory card (not included)
Push Notification
: push notification is received by the URMET app V-Stream on smartphone (IMPORTANT: it is
also necessary to enable the push reception for each camera inside the V-Stream -> ALARM menu).
Snapshot on SD
: event picture is saved on the local micro SD memory card (not included).
Sound alarm
: alarm sound emitted by the camera. Check the next menu to select the sound type
【
Alarm
】
→
【
Sound Alarm
】
.
6. Press
Save
to save the changes.
ø
IMPORTANT:
The Human tracking function must not be considered a function of a burglar alarm system, capable of intercepting and
identifying any intrusions.
