DS1058-007A
5
1.3
SYSTEM COMPONENTS
1.3.1
Interface radio module 1058/010
Outdoor bidirectional radio module controls the whole wireless system and
processes information from peripheral units; it makes up the interface between
wired alarm control panel and wireless devices.
The module includes:
•
8 outputs with solid state relays for warnings from wireless detectors;
•
1 output with solid state relays for physical sabotage alarm warning;
•
1 output with solid state relays for radio sabotage alarm warning;
•
1 output with solid state relays for battery low warning;
•
1 output with solid state relays for arming/disarming command via remote
control;
•
1 output with solid state relays for radio module (arm/disarm) status
repetition;
•
1 input for radio module tamper;
•
1 input S to detect wired alarm control panel status;
•
1 input BL to arm wireless sirens from wired alarm control panel.
The module takes power supply out of wired alarm control panel it is connected to.
Other radio module characteristics are:
•
protection against opening and removal;
•
relays which can be biased by jumpers;
•
status and warning LEDs.
1.3.2 Microcontact
Magnetic detector to detect opening or closing status in door or window it is
mounted on. It is supplied by a lithium battery and communicates via radio with
radio module 1058/010 in bidirectional mode.
The Microcontact has a programmable auxiliary input, to which there can be
connected either other NC (normally closed) detectors (e.g. magnetic detectors)
or a shutter detector; microcontact has also LEDs to warn about radio
communication. Programming is by jumpers. A tamper assures protection against
opening and removal.
The device has test, supervision and battery low warning functions.
The microcontact is available in two versions:
•
White
colour
1058/201
•
Brown
colour
1058/202
1.3.3
Indoor IR detector 1058/101
Detector with passive infrared rays to detect movements in area supervised by it.
It is supplied by a lithium battery and communicates via radio with radio module
1058/010 in bidirectional mode.
Detector 1058/101 has LEDs to warn about radio communication.
A tamper assures protection against opening and removal.
The detector can be mounted in angular position by provided support.
The device has test, supervision and battery low warning functions.
