DS1058-007A
23
4.1.5 Supervision
function
Supervision is a regular check on the effectiveness of radio connection between radio module 1058/010
and its peripheral units. Should the check be unsuccessful, relay RF SAB is armed. Supervision function is
enabled by DIP switch B3.
4.2
MICROCONTACT 1058/201 OR 1058/202
4.2.1 Power
supply
The device is provided with a pre-installed cell.
Remove the isolator pulling plastic tang on the rear side of the device.
After it was supplied, micro contact starts up an initialisation step which lasts about 2
minutes. During this step, its LED goes on blinking in colour red. When the LED goes
off, you can go on with acquisition step.
LED and
programming / test key
Microcontact
Magnet
