10
DS1058-007A
Battery low warning (
)
1. Press three times control pushbutton at the front side on radio module 1058/010: 3 beeps are
sent out and LED
stops blinking and is lit steady.
2.
Press control pushbutton and keep it pressed for 3 seconds:
•
radio module 1058/010 sends out 3 beeps,
•
LED
goes on steady,
•
one or more status LEDs 1÷16 go on to show which detection devices (microcontacts and IR
detectors) have battery low.
3.
Press control pushbutton:
•
radio module 1058/010 sends out 3 beeps,
•
LED
goes off and LED
goes on steady,
•
one or more status LEDs 1÷2 go on to show which actuation devices (sirens) have battery
low
4.
Press control pushbutton and keep it pressed for 3 seconds:
•
radio module 1058/010 sends out 3 beeps,
•
if the batteries of all wireless devices have a sufficient charge, LED
goes off and alarm
memory is erased; otherwise, the LED resumes blinking.
5.
Radio module 1058/010 returns to normal operation
Warning:
battery low warning goes off as soon as all wireless devices have batteries sufficiently charged,
although alarm details were not controlled.
2.3
WARNINGS FROM DETECTION DEVICES
2.3.1
Microcontact 1058/201 or 1058/202
In normal operation conditions, the microcontact does not warn about transmissions by LED.
Front LED blinks first red (signal sending) then green (reception confirmation from radio module 1058/010)
when:
•
Microcontact is in battery low condition.
•
The cover was opened or antiremoval (tamper) protection was anyhow armed.
•
TEST key was pressed. When in Test mode, the LED will blink whenever the contact is armed.
2.3.2 Detector
1058/101
In normal operation conditions, detector 1058/101 does not warn about transmissions by LED.
Front LED blinks first red (signal sending) then green (reception confirmation from radio module 1058/010)
when:
•
The detector is in battery low condition.
•
The cover was opened or antiremoval (tamper) protection was anyhow armed.
•
TEST key was pressed. When in Test mode, the LED will blink whenever the detector is armed.
