75
Data Repeat Settings:
When selecting a button the data repeat options are visible. Most of the times
these can and should be left at their default state. However, in certain
situations they need to be changed to a custom setting for an individual button
to improve performance.
●
Repeat while button is pressed:
This option determines if the device
command function
repeats
for as long as the button is
continuously
pressed
down. Select the box to set the command to repeat while
pressed. This setting is commonly used for commands such as
volume
where the user presses the button to raise or lower the level until it
reaches the desired point.
●
Use device’s default setting:
This option sets the button to use the
same command repeat settings
that are applies to the device
properties. These are adjustable for the entire device under the
Home Overview page.
●
Use custom setting for this device:
Selecting this option allows the
button to have the
repeat settings
set
individually
, applying only to
it and no other buttons. The effect of the
repeat/macro repeat
and
min repeat while pressed
values here are the same as
macro
repeat and button pressing repeats
values respectively, which are
found under the
device properties
in the Home Overview. See the
device properties in the
Home Overview
section for additional details.
