Pencil Icon:
use this icon to edit the device properties
34
The
name of the device can be changed
by editing the displayed text.
Command Repeat settings
effect how the hub sends out commands to
the device. There are two (2) settings which can be adjusted here, though
this is normally not required or advised unless the device is not
working properly.
Macro repeat
, the first value, controls how the command is sent when a
macro is triggered. IR commands are pulsed in order to operate a device and
three (3) is the normal setting for this. This does not mean the command
acts on the device three (3) times, but rather that the command is sustained
for three (3) pulses.
Button pressing repeats
, the second value, controls how the command is
sent when a physical button is pressed. A setting of one (1) is normally
optimal, but may need to be increased if the device is not responding.
