28
●
Devices like Sonos, the
MAC address
of the unit must be entered
manually into the MX HomePro Editor.
The
MAC address
is not automatically discovered by the software,
this information is usually found on the device itself.
●
Other devices like the Nest Learning Thermostat
do not require
additional setup here.
The installation is completed after entering the name for the
device; however,
once the system is downloaded
the user
needs to enter information such as their
account login
credentials
into the user interface after selecting the device on
the
Home Menu
.
●
Devices like Roku only require the
IP address and network port
used for communication.
Enter the
IP address
in the field labeled for it.
●
Some devices require a
username and password
to be entered
into the MX HomePro Editor.
Enter the exact username and password
used by the device.
●
Certain devices require one (1) or more parameter values to be
entered into the MX HomePro Editor.
These can vary depending on the device. Each parameter has a
description value that needs to be entered. The Editor does not
allow any progress from this screen until all parameters are
entered.
